Simprolit blocks

Generally, Simprolit blocks can be classified as blocks for outer walls or blocks for partition walls and facade casing.

Blocks for outer facade walls are produced in 20cm, 25cm and 30cm thicknesses. Depending on the type and the possible application of the block, they have:

4 longitudinal cavities, 2 of which are hollow and 2 with the bottom (block types «SB» and «SBS»); if necessary, additional longitudinal thermo-insulation styrofoam or Simprolit pads can be put into cavities with the bottom.
2 cavities, both hollow (block types "SBD" and "SBDS"); if necessary, additional longitudinal thermo-insulation styrofoam or Simprolit pads can be put into both cavities next to the outer wall (rib) of the block.
Except for the above mentioned cavities , Simprolit blocks belonging to series "S" (block types "SBS" and "SBDS'), have additional transversal cavities placed in the middle of the block.

Blocks for partition walls and facade casing are produced in basic thickness of 12 cm. Upon special request, 8cm and 15cm thick Simprolit blocks can also be produced in conformity with Technical conditions.

Thereby:

Classic partition blocks have 2 hollow cavities (Simprolit partition blocks type "SPB")

Partition blocks belonging to "S" series (Super) have an additional hollow gap in the middle of the block (Simprolit partition blocks type "SPBS").

simprolit ^®