Page 1 - Simprolit thermo-sound-insulating blocks for inside walls - flayer

Walls inside the building made of Simprolit thermal-sound-
insulating blocks:
Have characteristics significantly better than the minimum
prescribed,
Compared to the standard solutions, they are easier (it does
not matter in determining the necessary building
reinforcement, especially seismic),
They are simple to perform (performed in one stroke),
Less thickness (which provides additional net housing space for
sale),
Walls can be immediately disposed of and divided wall heating
without prior thermal insulation of the base wall,
The wall made of SBDNZ-20 Simprolit blocks has 53 dB sound
insulation,
The wall made of SBDNZ-20 Simprolit blocks is 180 minutes
resistant to fire

®
SIMPROLIT THERMO-SOUND-INSULATING

BLOCKS FOR WALLS INSIDE THE BUILDING

Next to the norms, regulations and directives of the national
provisions of EU member states, they realize that soon it will not be
only a condition for technical reception, but an important condition for
evaluating residential buildings in transport; the Energy Efficiency
Study has become an integral part of mandatory project
documentation. However, depending on the phase introduction of the

norms of the national provisions on the basis of which the Energy
Efficiency Study (EEE) is elaborated, its comprehensiveness is also
different.
IN THE FIRST PHASE, as regards architectural and construction work, the
energy efficiency of the facade coating - walls, without or with facade
coating and facade openings (windows, stained glass, balcony doors) is
considered.
IN THE SECOND PHASE, the normative provisions introduce the elements
of the interior walls, first of all those to the unheated or heated
corridor, the interior staircase, as well as the walls between the heated
rooms of different users. Only after this phase it is possible to
introduce and measure individual energy consumption for heating the
apartments.
IN THE THIRD PHASE, a comprehensive concept of Eco-Friendly is
introduced, which besides energy efficiency defined as "heat comfort"
introduces the concepts of "air comfort", "light comfort" and "sound
comfort".
In essence, the existing ones are merged and, in accordance with the
development of technological processes and systems, new norms and
standards from those areas, defined as "comfort of housing", are
introduced.
The seriousness of these requirements is reflected in the EU Directive
that Member States prescribe penalties relating to violations of the
provisions adopted in accordance with the Directive, which must be
effective, proportionate and dissuasive.
It is envisaged that penalties are paid not only by owners, investors
and users, but also by the state as a whole.

Simprolit system®, within its comprehensiveness, has solutions that
far outweigh the minimum requirements that the facility must satisfy.
For example, blocks of the Simprolit system for facade walls with a
thickness of only 25 cm, without additional thermal insulation, have
thermal conductivity in much less than the maximum prescribed, and
blocks of thickness of only 30 cm, without additional thermal
insulation, meet the requirements for facade coatings of objects and
above the polar circle!
On the inside walls, the unified conditions of Ecological compatibility
are:
Walls to the heated area, including the walls between the
2
apartments of different users, must have Umax=0.9 /(m K), and „SIMPROLIT“ DOO, BELGRADE
the walls to the unheated area (corridors, stairs) www.simprolit.com
2
Umax=0.4 /(m K) www.simprolit.rs
Sound insulation minimum Rw =52 dB
Fire resistance minimal 120 minutes – EI120