Page 1 - Simprolit thermoinsulating SOP plates - flayer

By EN 13501-1:2007+A1:2009
Reaction to fire classification: A2 – s1, d0
Resistance to fire of partition wall made of
SOP10 – EI 120
Thermal conductivity in dry condition:
λ0=0.042 W/mK
Coefficient of water vapor diffusion resistance:
SOP 10 – without mortar: u=3,336
SOP 10 – with thin mortar: u=3,856

SIMPROLIT THERMO-INSULATING SOP PLATES

®
– ELEMENTS OF SIMPROLIT SYSTEM
Simprolit single-layer SOP plates are part of the innovative irregularities during installation, Simprolit SOP plates can be
©
Simprolit system , the most extensive ecological construction surface leveling by scraping with hand scraper or plain
system. aluminum rack with one oblique edge.
Simprolit single-layer SOP plates meet a range of Except standard finishing with ETICS system (glue-mesh-glue),
requirements of building physics, environmental construction Simprolit SOP plates can also be plastered using thick mortar
and exploitation of the facility, such as: durability, thermo- , as SOP plates do not absorb water from the mortar, so there
insulation, steam permeability, fire resistance, frost resistance, is no danger that the mortar "burned out" and crack.
hydrophobicity, resistance to impact, resistance to pressure and On Simprolit SOP plates can be applied any type of facades,
tension, resistance to extreme climatic conditions of high and directly stick ceramic and stone claddings, formed wall
low temperature and 100% air humidity, resistance to the storm decorative elements and others.
type winds, , hails and floods, the economy at the installation
and exploitation… - STEAM PERMEABILITY:

Facade wall insulated with Simprolit SOP plates can breathe,
- ECONOMY, SIMPLICITY AND AFFORDABLE PRICE: such as human skin, throwing out all the harmful substances
Simprolit SOP plates are manufactured from a patented which from the residential area, along with a steam, maturing in
capsulated Simprolit polystyrene concrete, weighting only 160 facade wall.
kg/m . It is indisputable that the steam permeability of walls is one of
3
Simprolit SOP plates are rigid in their own plane and that the basic and most important requirements of ecological
because of its compressive strength and tightening does not construction and healthy housing conditions during service of
require a flat wall surfaces to be coated (which is the basic facility.
condition for the application of other materials, particularly in the Otherwise, vapor sealed or poorly vapor-permeable materials
case of thermal insulation with mineral wool or Styrofoam. for thermal insulation, such as extruded (EPS) or expanded
Simprolit SOP plates are easy to install – they are leveling over (XPS) polystyrene, which are three to five times less water
"muffins" of glue and dowels with anchors to "hat", whereby total vapor permeable than conventional brick walls, retain all these
consumption of glue is 2-5kg smaller per m of facade than harmful substances in the facade wall making some kind of
2
wearing the same adhesive at mineral wool. "septic tank", which again, on reaching the limit concentration of
Simprolit SOP plates are easily cut and brought to the required harmful substances in the wall after ten years or less, all of the
dimension - even a simple handsaw for wood. In the event of "dirt" returns in a residential area.